SEIKO INSTRUMENTS microscopes - Non-contact mode - High force constant - Reflex coating
|Resonance Frequency||130 kHz||110 - 150 kHz|
|Force Constant||15 N/m||9 - 25 N/m|
|Length||225 µm||220 - 230 µm|
|Mean Width||33 µm||27.5 - 37.5 µm|
|Thickness||5 µm||4.5 - 5.5 µm|
This AFM probe has alignment grooves on the back side of the support chip.
Point Probe AFM tip
NanoWorld® Pointprobe® SEIHR probes are designed for owners of a Seiko Instruments microscope using the non-contact mode. All SPM and AFM probes of the Pointprobe® series are made from monolithic silicon which is highly doped to dissipate static charge. They are chemically inert and offer a high mechanical Q-factor for high sensitivity. The tip is shaped like a polygon based pyramid with a typical height of 10 - 15 µm.
Additionally, this probe offers typical tip radius of curvature of less than 8 nm.
A trapezoidal cross section of the cantilever and therefore 30% wider (e.g. NCH) cantilever detector side result in easier and faster laser adjustment. Additionally, because there is simply more space to place and reflect the laser beam, a higher SUM signal is reached.
Tip shape: Standard
Aluminum Reflex Coating
The aluminum reflex coating consists of a 30 nm thick aluminum layer deposited on the detector side of the cantilever which enhances the reflectance of the laser beam by a factor of 2.5. Furthermore it prevents light from interfering within the cantilever.
|Order Code||Quantity||Data Sheet|
NanoWorld® Pointprobe® Silicon AFM Probes Screencast (Standard Tip)
For detailed information about our AFM probe product series please see below: