 |
 Type: Arrow™ FM |
| Force Modulation Mode |
|
|
Optimized positioning through maximized tip visibility NanoWorld Arrow™ FM probes are designed for Force Modulation Mode imaging. The Force Constant of the FM type fills the gap between Contact and Non-Contact probes. Furthermore Non-Contact / TappingMode™ imaging is possible with this AFM probe. All probes of the Arrow™ series are made from monolithic silicon which is highly doped to dissipate static charge. They are chemically inert and offer a high mechanical Q-factor for high sensitivity. The probes feature a rectangular cantilever with a triangular free end and a tetrahedral tip with a height of 10 - 15 µm. Additionally this probe offers a typical tip radius of curvature of less than 10 nm. The unique Arrow™ shape with the tip position at the very end of the cantilever allows easy positioning of the tip on the area of interest. |
| Technical Data | Value | Range* |  |
| Thickness | 3.0 µm | 2.5 - 3.5 | |
Cantilever Geometry |
W = 35 µm L = 240 µm |
30 - 40 235 - 245 |
|
| Force Constant | 2.8 N/m | 1.4 - 5.8 | |
| Resonance Frequency | 75 kHz | 58 - 97 | |
| Order Code | Quantity | Data Sheet | |
| Arrow FM-10 | 10 | Nominal values | |
| Arrow FM-20 | 20 | Nominal values | |
| Arrow FM-50 | 50 | Nominal values | |
| Arrow FM-W | 380 | Nominal values | |
* Typical values |
|||
|
For more information contact: info@nanoworld.com
| |
|
Arrow™ is a trademark of NANOWORLD AG TappingMode™ is a trademark of Digital Instruments Inc. GelPak® is a registered trademark of Vichem Corporation All data are subject to change without notice. |
NanoWorld AG Rue Jaquet-Droz 1 Case Postale 216 CH-2002 Neuchâtel Switzerland www.nanoworld.com |