![]() |
Type: Arrow NC |
| Non-contact / Tapping™ mode |
Optimized positioning through maximized tip visibility NanoWorld Arrow NC probes are designed for non-contact or tapping mode imaging. This probe type combines high operation stability with outstanding sensitivity and fast scanning ability. All probes of the Arrow series are made from monolithic silicon which is highly doped to dissipate static charge. They are chemically inert and offer a high mechanical Q-factor for high sensitivity. The probes feature a rectangular cantilever with a triangular free end and a tetrahedral tip with a height of 10 - 15 µm. Additionally this probe offers a typical tip radius of curvature of less than 10 nm. The unique Arrow™ shape with the tip position at the very end of the cantilever allows easy positioning of the tip on the area of interest. |
| Technical Data | Value | Range* | ![]() |
| Thickness | 4.6 µm | 4.1 - 5.1 | |
Cantilever Geometry![]() |
W = 45 µm L = 160 µm |
40 - 50 155 - 165 |
|
| Force Constant | 42 N/m | 27 - 80 | |
| Resonance Frequency | 285 kHz | 240 - 380 | |
| Order Code | Quantity | Data Sheet | |
| Arrow NC-10 | 10 | Nominal values | |
| Arrow NC-20 | 20 | Nominal values | |
| Arrow NC-50 | 50 | Nominal values | |
| Arrow NC-W | 380 | Nominal values | |
* Typical values |
|||
| For more information contact: info@nanoworld.com |
|
| Arrow is a trademark of NANOWORLD AG TappingMode is a trademark of Digital Instruments Inc. GelPak® is a registered trademark of Vichem Corporation All data are subject to change without notice. |
NanoWorld AG Rue Jaquet-Droz 1 Case Postale 216 CH-2002 Neuchâtel Switzerland www.nanoworld.com |