Type: PNP-TR-TL
Pyrex-Nitride AFM Probe – TRiangular AFM Cantilevers - TipLess
Cantilever Data* | Cant. 1 | Cant. 2 |
---|---|---|
Shape | Triangle | |
Resonance Frequency | 67 kHz | 17 kHz |
Force Constant | 0.32 N/m | 0.08 N/m |
Length | 100 µm | 200 µm |
Mean Width | 13.5 µm | 28 µm |
Thickness | 500 nm | 500 nm |
*Typical values
Leading edge in sharpness and durability
NanoWorld® Pyrex-Nitride AFM probes are designed for various imaging applications in contact or dynamic mode. Tipless AFM cantilevers are often used for applications that require functionalization of the AFM cantilever surface or attaching objects (like spheres or particles) to the end of the AFM cantilever. These and various other applications are especially interesting for the fields of life science and biology.
The Pyrex-Nitride AFM probes have silicon nitride AFM cantilevers with very low force constants. The AFM probe series features a support chip that is made of Pyrex. The TR series features two different triangular AFM cantilevers.
All chips are pre-separated prior to shipment and come in Gel-Pak containers.
Tip shape: Tipless
Gold Reflex Coating
The gold reflex coating consists of a 70 nm thick gold layer deposited on the detector side of the AFM cantilevers which enhances the reflectance of the laser beam. Furthermore it prevents light from interfering within the AFM cantilever.
As the coating is almost stress-free the bending of the AFM cantilevers due to stress is less than 2 degrees.
NanoWorld® Pyrex-Nitride AFM Probes (PNP) Screencast
Subscribe to NanoWorld® Youtube Channel
For more information contact: info@nanoworld.com
Pointprobe® is a registered trademark of NanoWorld AG
All data are subject to change without notice.
NanoWorld AG
Rue des Saars 10
CH-2000 Neuchâtel,
Switzerland
www.nanoworld.com
For detailed information about our AFM probe product series please see below: